314 Gallatin Pike N
Madison · TN · 37115
Madison · TN · 37115
Remove and discard the existing PVC membrane and EPS insulation down to the underlying EPDM only. Disable the existing EPDM roof membrane and leave in place, remove existing wall flashings, penetration flashings, perimeter trims, and gutter system. Mechanically attach (1) layer of 1” Polyisocyanurate Insulation cover board over the existing EPDM membrane to meet manufacturer specification. Install ¼” per foot tapered insulation as needed at the high side of the HVAC units to provide positive drainage. Install new protective walk pads on access sides of the existing HVAC units. Install new treated wood blocking to support existing gas lines. Flash all perimeters and penetrations as per manufacturer specifications. Install 24-gauge Kynar prefinished perimeter trims at parapet walls and gutter systems
To conduct general renovations as required to convert existing attached duplex structure to a single-family-residence (to be front unit of new detached duplex). To have 4 bedrooms,…
To conduct limited interior renovations to existing 1-story single-family residence. Scope to include kitchen, living room and sunroom only, no change to existing layout. No change…