Electrical Permits in Philadelphia, Pennsylvania

New Construction - Electrical Permit for combo RP-2025-012861

Addition and/or Alteration - Install a new 400-amp electrical service with four meter packs, including proper grounding and bonding. Install one 60-amp subpanel for the house panel, one 200-amp subpan...

Sign - FOR THE INSTALLATION OF WALL PANEL, TWO (2) FACELIT GREEN BANDING, AND TWO (2) STATICALLY ILLUMINATED FLAT WALL SIGNS. AS PER APPROVED PLANS. SEPARATE ELECTRICAL PERMIT REQUIRED.

Addition and/or Alteration - Installation of a 7.040 kWDC 5.86AC solar system, consisting of (16) SILFAB SOLAR: SIL-440 QD, 440W, AND (16) ENPHASE: IQ8A-72-2-US (240V) MICROINVERTERS AS PER 2017 NEC....

Addition and/or Alteration - Furnish and install fire alarm as per drawings and 2016 NFPA 72. Furnish and install 8 duplex outlets, 1 dedicated, 3 quad outlets, 1 floor core, 2 new 2x4, relocate 8 2x4...

Addition and/or Alteration - Installation of a complete fire alarm system, including fire alarm control equipment, initiating devices, notification appliances, and all associated wiring. All work to b...

Addition and/or Alteration - Installing wall heater (1), exhaust fan (1), dedicated circuit/ground fault receptacle (1), fixtures (2), 10 yr smoke detectors (2), 10 yr smoke/carbon combo and an arc fa...

Addition and/or Alteration - Rewire electric throughout to current NEC 2017 200 amp service Adequate receptacles throughout to code 1 lighting location in each room Arc fault and gfi protection where...

Addition and/or Alteration - remove existing 110v receptacle and install GFCI receptacle in its place. install wire mold and box where needed for new Hydration station

Addition and/or Alteration - remove existing 110v receptacle and install GFCI in its place. Install wire mold and box where needed for new Hydration station

Addition and/or Alteration - remove existing 110v receptacle and install GFCI receptacle in its place. install wire mold and box where needed for new Hydration station

Addition and/or Alteration - remove existing 110v receptacle and install GFCI receptacle in its place. install wire mold and box where needed for new Hydration station

Addition and/or Alteration - remove existing 110v receptacle and install GFCI receptacle in its place. install wire mold and box where needed for new Hydration station.

Addition and/or Alteration - remove existing 110v receptacle and install GFCI receptacle in its place. install wire mold and box where needed for new Hydration Station

Addition and/or Alteration - Install 200 amps service, panel, switches, receptacles, light fixtures, rewire entire property as per NEC code.

Addition and/or Alteration - Electrical Permit for combo RP-2026-001114

Addition and/or Alteration - Install 200amp service. Wire throughout with lights, outlets, switches, fixtures, smoke/co detectors.

Addition and/or Alteration - INSTALL 100 AMP ELECTRICAL SERVICE AND THE MAIN CIRCUIT BREAKER PANEL WITH PROPER GROUNDING AND BONDING. REWIRE HOUSE THROUGHOUT. INSTALL LIGHTING, SWITCHES AND RECEPTACLE...